Assessment Validation: A Beginner's Guide to Validating Assessments

Assessment Validation: A Beginner's Guide to Validating Assessments

Blog Article

RTOs have numerous responsibilities post-registration, including annual declarations, AVETMISS reporting, and ensuring marketing compliance. Among these tasks, validation often stands out as particularly challenging.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

Simply put, validation confirms which aspects of an RTO's assessment process are right and identifies where improvements are needed. A clear understanding of its main components makes it less intimidating.

Clause 1.8 of the 2015 SRTOs indicates that RTOs need to ensure their assessment systems, including RPL, are compliant with training package requirements and conducted in accordance with the Principles of Assessment and Rules of Evidence.

We must adhere to the standards by conducting two types of validation.

The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.

The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.

This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.

The Two Types of Assessment Validation Explained

The Basics of Assessment Validation

As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.

On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.

This discussion will center around assessment tool validation.

Steps for Conducting Assessment Tool Validation

Having outlined the two types of validation, it’s time to dive into assessment tool validation.

When Assessment Tool Validation Should Be Done

Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

This means that whenever new learning resources are acquired, you must perform assessment tool validation before student use.

No need to wait for the next validation schedule in your 5-year cycle. Validate new resources immediately to ensure they’re suitable for students.

Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:

- updating your resources
- new training products are added to your scope
- your course includes training product updates
- learning resources get identified as a risk during your risk assessment

ASQA's risk-based regulation approach requires RTOs to conduct regular risk assessments. Therefore, complaints from students about learning resources are a perfect time for assessment tool validation.

Selecting Training Products for Validation

Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.

Starting Assessment Tool Validation: What You Need

Study Resources

To conduct assessment tool validation, you will need the entire suite of your learning resources:

Mapping tool – this is the initial document to review. It identifies which assessment items address unit requirements, speeding up validation.

Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Panel of Validators

Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.

In total, your validation panel must have:

Up-to-date vocational competencies and industry skills pertinent to the unit being validated

Recent knowledge and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its equivalent

Assessment validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.

Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.

We recommend using a more detailed template to examine each unit requirement and the assessment items that correspond to them. Here is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Inspect?

As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.

Assessment Principles
Fairness – Are equal opportunities and access offered to everyone in the assessment process?

Flexibility – Does the assessment offer various options to demonstrate competence based on different needs and preferences?

Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Fundamental Rules of Evidence

Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work is the candidate’s own?

Currency website – Are the assessment tools reflective of current units of competency and contemporary industry practices?

Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Demonstrate What You Teach

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

diaper changing

prepare bottles, feed babies from bottles, and clean equipment

solid food preparation and feeding babies

respond properly to baby signs and cues

prepare babies for sleep and settle them

monitor and support age-appropriate physical exploration and gross motor skills

Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Be Mindful of Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.

Entire or Not Competent

Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What information might be included in a work package?

Possible answers may include:

Necessary materials

Corresponding costs

Activity length

Allocated roles and responsibilities

If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Possible answers may include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – eliminating hazards, isolation, use of engineering controls

People – isolating, use of engineering controls, administration

Structural hazards – substitution, isolation, use of engineering controls

Chemical hazards – isolation, engineering, administrative controls

Equipment or machinery – isolation, engineering, administrative controls

Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.